PC Recommended to control and process data for the R-AXIS IV, IV++ and HTC using CrystalClear™or StructureStudio™
| Item No. | Description |
| 1 | Dell Precision Workstation T3400 Intel Core 2 Duo Processor 2.20 GHz, 2MB L2, 800 MHz, HT |
| 2 | Operating System: Windows® XP Professional, SP2 with Media |
| -- or -- | |
| Red Hat Fedora Core LINUX® | |
| 3 | MiniTower Chassis Configuration (No 1394 Card) |
| 4 | Memory: 2GB, 800MHz, DDR2 SDRAM Memory, ECC (2 DIMMS) |
| 5 | Graphics Card and cable: 128MB PCIe x16nVidia Quadro NVS 285, Dual DVI or Dual VGA Capable (requires 1 free Express slot) |
| 6 | Hard Drive Configuration: C12 All SAS drives, Non-RAID, 1 drive total configuration |
| 7 | Boot Hard Drive: 300GB, 3Gbps, SAS, 3.5 inch, 15K RPM Hard Drive |
| 8 | Hard Drive Internal Controller: Dell SAS 5/iR Controller with RAID 0 or 1 |
| 9 | 16XDVD and 16XDVD+/-RW, w/ Cyberlink PowerDVD and Roxio Creator |
| 10 | 3.5 inch 1.44MB Floppy Drive |
| 11 | Monitor: Dell 19 inch (18 inch vis) UltraSharp 1908FP Flat Panel, adjustable stand, VGA/DVI |
| 12 | Performance Keyboard and Mouse Combo, PS/2 Connection |
| 13 | Internal Chassis Speaker |
| 14 | NTFS File System |
| 15 | Execute Disable Bit for Microsoft Windows XPSP2 set to OFF |
| 16 | Resource CD - contains Diagnostics and Drivers |
| 17 | Serial Port Adapter (computer requires a minimum of two serial ports) |
| Non-DELL components | |
| 1A | Intel Ethernet card (PC-NIC-GIGA) (requires 1 free PCI slot) |
| 2A | Osprey 100 Video Capture Card (CCD-OSPREY 100) and cable (VID-BNC/RCA-25FT) (requires 1 free PCI slot). Note that LINUX control does not support video system. |
| 3A | 8-port USB serial adaptor (USB-SERIAL8) for Windows based PC and cable (GEN-02-25'RS232) |
| -- or -- | |
| 2 port Serial Card Adaptor (CCD-PCI-SERIAL2) for LINUX based PC and cable (GEN-02-25'RS232) | |
| 3B | Adaptec SCSI Card 2930 Ultra (for use with R-AXIS IV and IV++ using SCSI-based data transfer) and cable (RAX-CA5602-C6) (Six foot SCSI cable required for R-AXIS IV PC upgrade.) |
| -- or -- | |
| AS-PCI card (for use with R-AXIS IV++ and HTC using PCI-based data transfer) | |
Notes:
- PC control of any R-AXIS system requires a license for the CrystalClear or StructureStudio software package.
- The computer MUST contain three (3) free PCI slots.
- For SCSI based data transfer, the SCSI-ADAP-2930 card and cable (item 3B) is required. An upgraded version of this card cannot be substituted. The Adaptec SCSI card (Item 3B) should only be connected to the R-AXIS. It is needed for R-AXIS systems shipped prior to April 2004. Other SCSI devices (such as disk drives or tape drives) must not be connected to this card. These other devices may be connected to another SCSI card (either a second expansion card or an internal controller on the motherboard).
- Networking capabilities for the control computer should be provided to facilitate installation.
- Prior to purchasing your R-AXIS control PC, it is imperative that you e-mail the exact PC configuration to Rigaku for a final check to ensure compatibility. Please e-mail this information to comp-support@rigaku.com
- It is recommended that the PC (CPU box only) be shipped to Rigaku (freight pre-paid) for installation of software and related device drivers before installation of the R-AXIS. While at Rigaku, the computer will be tested with an existing R-AXIS to ensure that the computer has been correctly configured. Please obtain a quotation for software integration and testing and/or telephone support by contacting Rigaku.